Teamac Rust Converter 2.5L is a high-performance corrosion inhibitor designed for use on iron and steel surfaces where complete rust removal is not possible. It chemically converts rust into a stable, paintable surface, preventing further corrosion and extending the life of metal components. Initially applied as a milky-white liquid, it dries to a black finish, providing a clear visual indication of its effectiveness.

Key Features

• Converts rust into a stable, paintable surface.
• Non-flammable, low-sheen finish.
• Ideal for structural steel, machinery, and other rusted metal surfaces.
• Can be overcoated with water-based paints after 8 hours or solvent-based paints after 24 hours.

Application Instructions

1. Surface Preparation ? Remove dirt, grease, and loose rust using a wire brush or mechanical tools. A slightly damp surface improves performance, especially in warm weather.

2. Application ? Apply directly with a brush or roller. Do not thin the product, as it is designed for maximum effectiveness in its original formulation.

3. Drying Time ? The rust converter dries to a black finish, signaling that the chemical reaction has occurred. Overcoating should be done within 24 hours for best results.

Recommended Use

This rust converter is ideal for industrial and professional applications, such as bridges, machinery, fencing, and marine structures.

Limitations

• Not for use on non-metal surfaces.
• Not suitable for application below 5?C or in high humidity above 90%.
• Must be applied in well-ventilated areas ? avoid confined spaces without proper airflow.

Health and Safety

• Contains 2-Butoxyethanol, which may cause irritation on prolonged skin contact.
• Use gloves, eye protection, and proper ventilation during application.
• Follow local disposal regulations to prevent environmental contamination.