Teamac Rapidry QD Enamel White Gloss 5L is a quick-drying, industrial gloss finish designed for metal surfaces, including structural steel and metal fabrications. Its high-performance formula provides excellent adhesion and resistance to wear, ensuring long-term protection in demanding environments.

Applications

• Suitable for industrial and structural steel, machinery, and general metal fabrications.
• Dries quickly, allowing for faster project completion.
• Provides a durable, high-gloss finish that enhances both appearance and longevity.
• Ideal for factories, warehouses, and exterior metal structures exposed to weathering.

Key Benefits

• Quick-drying ? Touch dry in just 30 minutes under normal conditions.
• Excellent adhesion ? Bonds effectively to primed metal surfaces.
• Resistant to wear and abrasion, ensuring a long-lasting, protective finish.
• Designed for spray application but can also be applied by brush for small areas.

Application Guidelines

• Ensure surfaces are clean, dry, and free from oil, grease, or rust before application.
• For best results, apply over Teamac Rapidry HB Zinc Phosphate Primer.
• Recommended application methods: Airless spray (preferred for large areas), brush or roller (for smaller areas).
• Avoid applying in low temperatures or high humidity, as this may affect drying and adhesion.
• Always follow the manufacturer's data sheet for guidance on overcoating times and drying conditions.

Restrictions and Recommendations

• Not suitable for non-metal surfaces, such as wood or plastic.
• Do not apply in confined spaces without proper ventilation, as solvent vapours may accumulate.
• Avoid application in temperatures below 20?C or high humidity, as these conditions can delay drying.

Health and Safety

• UN Number: 1263 ? Flammable liquid; keep away from open flames and heat sources.
• Contains xylene isomer mixture, which may cause skin irritation and respiratory issues with prolonged exposure.
• Always wear protective gloves, safety goggles, and a mask during application.
• Ensure adequate ventilation when using in enclosed areas.
• Dispose of contents responsibly in accordance with local environmental regulations.