Product code: B002976
to see available stock and prices
A colourless treatment for use against all forms of interior woodworm attack. It eradicates woodworm and prevents re-infestation.
- Eradicates woodworm and prevents re-infestation.
- Kills all types of wood boring beetle.
- Solvent-based for maximum penetration.
- Can be used on interior structural timbers and furniture.
- Can be painted, stained, varnished or polished when dry.
- Suitable for interior use only.
- Low Odour.
3-4 sq metres per litre depending on situation.
2-5 days under average temperature and with good ventilation, but longer
under less favourable conditions.
After the previous coat has soaked into the timber.
Brush, dip, spray or injection (using containers with nozzle).
Do not thin.
To get the best results, wood should be clean, free from bark, dirt and any surface treatment such as paint or varnish.
Open up infested areas as far as possible, cut away and burn all badly attacked wood, making any necessary structural repairs. Treat remaining timbers in the vicinity of the outbreaks and all replacement timbers with the Woodworm Killer (T).
All surfaces should be flooded with Cuprinol Trade Woodworm Killer (T), paying particular attention to end-grain and flooding joints to ensure maximum protection. Normally two or three liberal coats are required with subsequent coats applied before the first is dry. The more product used, the better the protection achieved. For spray treatment one flooded spray coat is equivalent to one brush coat and should be applied using a low pressure, coarse (nonatomising) compression spray.
After use, remove as much product as possible from brushes etc, before cleaning with white spirit.